Category: Guide

echo "deb http://downloads.linux.hpe.com/SDR/downloads/MCP/Debian/ wheezy/current non-free" | sudo tee /etc/apt/sources.list.d/hp.listwget -qO- http://downloads.linux.hpe.com/SDR/downloads/MCP/GPG-KEY-mcp | sudo apt-key add -wget http://downloads.linux.hpe.com/SDR/add_repo.sh && chmod +x add_repo.shsudo ./add_repo.sh mcpsudo apt apt update && sudo apt install hpacucli

• Set target controller for all commands set target controller slot=4
• Show details of array X array X show
• Show controller config show config show config detail
• Show all controllers' status controller all show status controller all show detail
• Status of all disks physicaldrive all show status
• Show all disks physicaldrive all show detail
• Details for single disk physicaldrive 1I:1:1 show detail
• Show all logical drives logicaldrive all show
• Re-enable failed LD logicaldrive X modify reenable forced